• All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas

Product area

Shanghai Fulda Fluorocarbon Material Co., Ltd. is one of the most professional manufacturers of fluorocarbon materials in China.

  • 产品导入 (5)/image/S4vWLxTNR4aOJDg2cK8qNQ.jpg

FJ-C300 Series Waterborne Fluorocarbon Coatings



FJ-C300 series waterborne fluorocarbon coatings are a new type of environmen- tally-friendly fluorocarbon coating with super weathering resistance. They are confected from the acid and alkali resistant inorganic pigment and filling, metallic pigment, pearlescent pigment, auxiliary agent etc. by Shanghai Fuleda Fluoroca- rbon coating Fluorocarbon Material Co. Ltd., with taking super weathering resistance fluoro-resin emulsion as the base material.

Application Fields:

FJ-C300 series waterborne fluorocarbon coatings can be widely used in the painting dressing of outdoor structures which are used chronically without the necessity for maintenance, such as outdoor architectures (e.g. house, apartment, office building, factory, storehouse, express way, bridge, railway, and chimney), large-scale open installations (e.g. pipelines and stock tank of petroleum or chemical).


■ High environmentally-friendly

  There is no poisonous color in the coating. Its VOC value is near zero. It is odor free, harmless, environmentally-friendly.

■ Super weathering resistance

  Outdoor sever life is more than twenty years.

■ Corrosion resistance to chemicals

  This series coating has corrosion resistance to chemicals, such as acid, alkali and salt etc. and its solvent resistance is higher than most waterborne coating. It can be applied in the corrosion environment, such as the acid rain area, industrial polluted area and ocean climate area, without being damaged.

■ Stain resistant

  Because of its high content of fluorine, the coating surface can not be stained easily and is convenient for cleaning. Its hydrophobic surface is anti-rainprint.

■ Fine ornamental

  Just as the solvent-borne fluorocarbon coating,FJ-C300 waterborne fluorocarbon coating can be mixed into coating with various colors(e.g. solid color, metallic color, pearlescent color and special color etc.), and low, moderate gloss. Its color development is beyond that of solvent- borne coating.

■ Excellent construction performance

  Spray coating, roller coating, and brush coating is allowed, but not sagging. Its excellent adhesion realizes its good and tight adherence on the majority of materials. For metallic lacquer, roller coating, brush coating can be adopted with nearly no floating phenomenon. The film is punky, cracking resistance. The film can form in low temperature and has large construction scope. So it can be applied easily.

■ Economical efficiency

  It has the advantages of long service life, low maintenance cost, and high cost performance if applied in long-term.

Technological Parameters:


Top coat

Finish coat

Product No.




Dispersion in various colors

Sub-transparent dispersion




Solid content(Wt%)

Metal ≥50%


Solid ≥45%

percentage of coverage(theory)

16㎡/㎏on the condition of 20μm photopolymer

22㎡/㎏on the condition of 12μm photopolymer

Curing condition

Temp. 10-35℃; Humidity≤85%



Performance and quality

Testing method

HG/T 4104-2009

waterborne fluorocarbon

coating for construction

FJ-C300 actual result

State in container


Even and without hard lump after stirring

Even and without hard lump after stirring

Low temperature stability

GB/T 9755-2001 5.5

No deterioration

No deterioration

Drying time

GB/T 1728-89



Contrast ratio

GB/T 9755-2001 5.8




GB/T 926-1998



Water resistance

GB/T 1733

No abnormity in 168 hours

No abnormity in 168 hours

Acid rain resistance

GB/T 9274-1988immersion method

No abnormity in 48 hours

No abnormity in 48 hours

Alkali resistance

GB/T 9265

No abnormity in 168 hours

No abnormity in 168 hours

Laundering durability

GB/T 9266

≥3000 times

≥5000 times

Stain resistance(%) white or light color

GB/T 9780



Artificial climate resistance and

ageing resistance

Xenon lamp

accelerates ageing

3000h White and light color: 3000h

Discoloration≤level 2

Chalking≤level 1


Construction Notice:

Painting method: Spray coating, roller coating, andbrush coatin

Dilute:By using <10% water

Time interval of painting: Minimum 2 hours

Preceding requirement: Be sure that there is no floating dust and oil stain in base material whose moisture content<10%, and PH<10. It is better to precoat the close base coat

Construction environment: Temp. is not less than 5℃; Humidity is not more than 85%.

Packing and storage: 20L/barral, keep it hermetically in cool and dry place. Storage time of plain colored or finishing coating is 12 months, and of metallic paint coating is 6 months.

Packing and Supply:


Base coat, top coat, finish coat






The order quantity for primer, finishing paint, thinner and top coat of Fuleda color chart is not specified. The minimum monochromic supply for top coat ordered based on other companies sample is 20kg, and the delivery time is 2-5 days (without time of transportation)